Things to Remember when Fitting a Reversing Camera in Australia

With car camera systems becoming widespread today, it is now easy and affordable to buy a reversing camera in Australia. For a reasonable amount of money, you can purchase a monitor and camera combo that can help you significantly improve the safety and manoeuvrability of your vehicle. You can prevent driveway accidents and make it easier for you to reverse your car even in tight spaces.

But no matter which type of camera you'll choose, make sure it is installed properly. Otherwise, you'll miss out on all of the benefits having a reliable camera system can provide you with. Here are a few tips you should consider.

Quick Guidelines on Fitting a Reversing Camera

1. Use an inline fuse with the positive feed

Not using a fuse can potentially cause serious problems to your car's circuitry in case something goes wrong. As such, make sure to always use an inline fuse of one or two amps with the positive feed to the camera, keeping it as close as possible. Also, don't forget to double or triple-check the polarity of the wires and see if they are connected properly to prevent damage to both your car and your reversing camera kit.

2. Test the camera system before drilling

To save time and effort, be sure to fully test the camera before drilling holes on your vehicle. This way, you don't have to detach the camera system from your car later on in case it doesn't work. Once you have verified that the camera is working, you can now start figuring out where to place it.

3. Ensure that all electrical connections are waterproof

More often than not, the car reverse camera itself is well-protected from the elements, but you cannot always say the same thing about its electrical connections. To prevent water from damaging your camera system, ensure that all wires and cables are waterproof. Also, even if you're already using waterproof 4PIN cables, it certainly helps to add another layer of waterproofing to your connections.

4. Consider connecting the camera to the reversing light

Many reversing cameras monitor kits these days have the automatic switching feature, which enables the camera to automatically turns on when you put the vehicle in reverse. But in case yours doesn't have this feature, what you can do is wire it into the reversing light. This way, you don't have to manually switch on the camera whenever you're reversing your car.